Fuel Polishing Services

The Importance Of Fuel Polishing Services

Fuel is an important expense for most large-scale businesses. If you’re running a business that requires easy access to bulk diesel fuel, the best solution is to set up a fuel storage tank. However, over time, maintaining the quality of fuel in your tanks can be challenging. The longer you leave a tank full of fuel, the higher the risk of contamination becomes. And when you end up using contaminated fuel, the performance of your fuel-powered equipment, generators, and vehicles could be severely affected. In some cases, it could cause them to become unsafe for use or completely break down.

If you are thinking of storing large volumes of diesel fuel on-site, you need to ensure that it will always remain free from contaminants. You can do this through fuel polishing services. Fuel polishing is a special fuel cleaning method that involves removing impurities that have mixed with diesel fuel in your tank, thereby reducing the risks of causing equipment and vehicle engine. Here, we will discuss how fuel polishing works and the reasons why you need fuel polishing services.

How Fuel Polishing Works

Usually, removing contaminants from stored fuel is done through the filtration process by diesel tank cleaning services. Here, fuel passes through several filters that get finer at each level, catching any solids while allowing fluids to pass through. This removes the sludge and small solid particles from the fuel. And, with enhanced filters, water can also be absorbed and filtered away. However, filtration is not enough to completely clean your fuel. It is only part of the fuel polishing process.

Fuel polishing is a thorough process of eliminating fuel contaminants. The fuel is cleared of impurities through a special process that involves filtration, centrifuges, and coalescers. Advanced filters screen suspended particles and water is separated from fuel by centrifugal force. Any residual water will then be absorbed by a water-blocking filtration medium. If microbial growth is present, certain biocides are added to kill them off. After all these steps, your fuel should be clean and ready to be returned to the tank.

How Often Does Stored Fuel Need To Be Polished?

Industry experts suggest fuel polishing at least once a year. However, it all depends on how susceptible to contamination your fuel storage tank is. While an underground tank may only require annual fuel polishing, an above-ground tank that is exposed to rainwater, microbes, and sediments might need diesel storage tank cleaning and fuel polishing services more often. Be sure to have regular fuel tests and tank inspections to determine when it’s time to get your fuel polished.

Benefits Of Fuel Polishing Services

1. Save Money

The instinct of most people when they find out that their fuel has been contaminated is to throw the fuel away and purchase new stocks. However, this solution is expensive, not to mention dangerous for the environment. Before deciding to let your fuel go to waste, first find out if fuel polishing is an option for you. With moderate fuel contamination, fuel polishing can offer a cheaper and more eco-friendly solution. You can save money on fuel purchases, as well as fuel disposal costs. Moreover, since it improves the quality of your fuel, all your fuel-powered machinery, can run properly, preventing costly repairs and damages. Furthermore, since your operations can run smoothly with lesser downtime, you can maximise your business’ profitability.

2. Consistent Power Supply

Among the critical pieces of equipment that rely on clean fuel are generators. When a generator sits idle for a long time, it runs the risk of carrying contaminated fuel. This could cause it to suddenly shut down, leading to major problems for business operations, especially during a crisis or disaster. Not only does it interrupt production, but could also lead to health hazards, equipment damages, and asset losses. Fuel polishing services can help ensure that the fuel injected into your generator is free of any contaminants. So, you will have a reliable supply of power that allows you to use all the necessary applications to keep your facility or job site productive, safe, and secured.

3. Use Of Consolidated Fuel

Fuel tends to condense and turn solid when sitting in storage for an extended period. However, it does not affect their character as combustible fuel. A fuel tank cleaning service near you will probably suggest getting rid of consolidated fuel. But, with fuel polishing services, solidified fuel can be reprocessed and turned back into its liquid form so it can be utilised again. As such, you won’t have to throw that solid form away, providing you with another opportunity to save money and keep your worksite and the environment safe from danger.

4. Keep Filters Clean

Fuel that has passed the fuel polishing process is cleaner. It will not cause clogs to equipment filters as fast as contaminated fuel. Fuel polishing removes solid contaminants. Therefore, your equipment’s fuel filters won’t be burdened. This makes them work more effectively and have a longer lifespan. Consequently, you won’t have to change filters frequently and your maintenance tasks can be reduced. More than that, you will be able to reduce the risk of equipment malfunctions caused by filter blockages.

Making the most out of your resources such as stored bulk fuel necessitates attention and the right solutions. By imposing regular maintenance works like fuel polishing, you can ensure that your business will continue to run optimally, with minimal costs and lesser interruptions. To keep your fuel in its best condition, partner up with WA Refuelling Services. Our industry experts can offer you quality fuel and other products that will help streamline your business operations. Moreover, we provide you with on-site services to help ensure your fuel and tank will remain clean and safe for use. To learn more about our company, browse through our website or call WA Refuelling Services today on (08) 9359 1988.